WJ-3/WJ-3-160 CO2 Incubator
Application:
CO2 Incubator is widely used in modern medicine, biology,chemistry and agriculture science for the culture of biological cells, tissues and bacterial.
Features:
★Natural evaporation for humidification to ensure the chamber can maintain good humidity .
★Microcomputer control,accurate and easy for operation.
★Digital display for setting parameters.
★With infrared sensor and gold-plated probes to ensure accuracy.
★Adopting PID control technology,the CO2 concentration can be freely set within range of 0 to 20%, alarm for over concentration and concentration rise too slow.
★Water jacket and air jacket structure are available, polished stainless-steel chamber with air duct. Equipped with fan for forced convection, ensuring good temperature uniformity and the balance of CO2 concentration inside.
★When door opened,the fan and the CO2 intake valve will automatically turned off, heating will be stopped to reduce the pollution caused by the entry of air.
★ Alarm function for over-heating, lack of water, unaspirated, ensuring the safe operation of the equipment.
★Equipped with UV sterilization system to reduce pollution.
Spec:
Model | WJ-3 | WJ-3-160 | |
Chamber Volume(L) | 80 | 160 | |
Temperature Range(℃) | RT+3~60 | ||
Temperature Stability(℃) | ≤±0.2 | ||
Temperature Uniformity(℃) | ≤±0.3 | ||
Timing Range | 1~9999min or without timing | ||
CO2 Range | 0~20% | ||
CO2 Control Accuracy | ± 0.1%(Imported sensor) | ||
Humidity Method | Natural Vaporization | ||
Power Supply | AC220V,50HZ | ||
Power Rating(W) | 600 | 900 | |
Chamber Size (W×D×H)cm | 40*40*50 | 50×50×65 | |
Exterior Size((W×D×H)cm | 57*59*93 | 69×69×100 | |
Alarm function | Over heating, damage for temperature probe ,water shortage |