MTR3CMOS camera adopts SONY Exmor CMOS sensor as the image-picking device and USB3.0 is used as the transfer interface to increase the frame rate.
With the two-stage peltier cooling sensor chip to -42 degree below ambient temperature. This will greatly increase the signal to noise ratio and decrease the image noise. Smart structure is designed to assure the heat radiation efficiency and avoid the moisture problem. Electric fan is used to increase the heat radiation speed.
USB3.0 is used as the data transfer interface to increase the frame rate.
MTR3CMOS comes with advanced video & image processing application ToupView; Providing Windows/Linux/OSX multiple platform SDK; Native C/C++, C#/VB.NET, DirectShow, Twain Control API;
The MTR3CMOS can be widely used in low light environment and microscope fluorescence image capture and analysis, as well as the astronomy deep sky application.
The basic characteristic of MTR3CMOS can be summarized as follows:
- Standard C-Mount camera with SONY Exmor CMOS sensors from 1.7M to 45M;
- Two-stage TE-cooling with controllable electric fan;
- Sensor chip cooling up to 42°C below ambient temperature;
- Working temperature can be regulated to specified temperature in 5 minutes;
- Smart structure to assure the heat radiation efficiency and avoid the moisture problem;
- IR-CUT/AR coated windows;
- Up to 1 hour long time exposure;
- USB3.0 5Gbit/second interface ensuring high speed data transmission;
- Ultra-FineTM color engine with perfect color reproduction capability;
- With advanced video & image processing application ToupView;
- Support both video and trigger modes;
- Providing Windows/Linux/Mac OS multiple platforms SDK;
- Native C/C++, C#/VB.NET, DirectShow, Twain control API;
Order Code | Sensor & Size(mm) | Pixel(μm) | G Sensitivity Dark Signal |
FPS/Resolution | Binning | Exposure |
---|---|---|---|---|---|---|
MTR3CMOS20000KPA MTRP120000A |
20M/IMX183(C)1″(13.06×8.76) | 2.4×2.4 | 462mv with 1/30s 0.21mv with 1/30s |
5@5440×3648 10 @ 4096×2160 15@2736×1824 30@1824 x1216 |
1×1, 2×2, 3×3 |
0.1ms~3600s |
MTR3CMOS20000KMA MTRM120000A |
20M/IMX183(M)1″(13.06×8.76) | 2.4×2.4 | 388mv with 1/30s 0.21mv with 1/30s |
17.8@5440×3648 41 @ 4096×2160 51@2736×1824 64@1824 x1216 |
1×1, 2×2, 3×3 |
0.1ms~3600s |
MTR3CMOS16000KPA MTR3P116000A (New) |
16M/MN34230(C) 4/3“ (17.60×13.30) |
3.8×3.85 | 2413LSB 89.1 LSB (Gain=0dB) |
6 @4648×3506 20@2304×1750 48@1536×1168 |
1×1, 2×2, 3×3 |
0.15ms~3600s |
MTR3CMOS16000KMA MTR3M116000A (New) |
16M/MN34230(M) 4/3“ (17.60×13.30) |
3.8×3.85 | 2560LSB 89.1 LSB (Gain=0dB) |
22.5 @4648×3506 43@2304×1750 48@1536×1168 |
1×1, 2×2, 3×3 |
0.15ms~3600s |
MTR3CMOS10300KPA MTR3P110300A(New) |
10.3M/IMX294(C)4/3″(17.47×12.86) | 4.63×4.63 | 419mv with 1/30s 0.12mv with 1/30s |
7.5@3704×2778 10@4096×2160 60@2048×1080 96@1360×720 |
1×1, 1×1, 2×2, 3×3, |
0.15ms~3600s |
OTHER HARDWARE CONFIGURATION | |
---|---|
Spectral Range |
380-650nm (with IR-filter), for Monochromatic Camera, AR Is Used |
White Balance |
ROI White Balance/ Manual Temp-Tint Adjustment |
Color Rendering Technique |
Ultra Fine Color Engine |
Capture/Control API |
Native C/C++, C#, Directshow, Twain, Labview |
Recording System |
Still Picture and Movie |
Cooling System* |
Two-stage TE-cooling System -45 °C below Camera Body Temperature |
OPERATING ENVIRONMENT | |
Operating Temperature |
-10℃~ 50℃ |
Storage Temperature |
-20℃~ 60℃ |
Operating Humidity |
30~80%RH |
Storage Humidity |
10~60%RH |
Power Supply |
DC 5V over PC USB Port |
SOFTWARE ENVIRONMENT | |
Operating System |
Support Microsoft Windows XP / Vista / 7 /8 /10(32 & 64 bit) |
PC Requirements |
CPU: Equal to Intel Core2 2.8GHz or Higher |
Memory: 2GB or More |
|
USB port: USB2.0 High-speed Port |
|
Display: 17″ or Larger |
|
CD-ROM |