CS-800

Product Introduction:

CS-800 uses 8/d(8°/diffused illumination),design the upward test caliber, can measure state of solid,
samples of different particles, powder, paste etc. easily.

Solid samples (steel, cloth) can be placed directly on the measurement port, particles (tablets, master
batch), powder (pigment, coffee), paste objects (tomato sauce) can be placed in a Petri dish, and then placed
in the mouth of the measurement test.

Using ETC (Every Test Calibration) real-time calibration technique, in each measurement, the
spectrophotometer will be to calibrate the system hardware and software.

This technique solves the problem of long-term stability and measurement data drift color measuring
instrument fundamentally. Spectral reflectance standard deviation within 0.08, Chroma value Delta E*ab
maximum value of 0.03, the Inter-instrument agreement is less than 0.2.

The spectrophotometer can be connected through the use of PC and color management software,
it is easy to the quality control and color data management of enterprises. The color management of user
data, compare the color difference, generate test report, to provide a variety of color space data, color
management of customized customer.

 

Specifications
Illumination d/8(Diffused lighting, 8 degrees observe angle)SCS optical engine(light splitting and integration system),ETC
(real time calibration technology),SCI(specular reflection included)/
SCE(specular reflection excluded)simultaneous measurement。(conform to CIE No.15、 ISO 7724/1、 ASTM E1164、 DIN 5033 Teil7、
 JIS Z8722 Condition c standards)
Size of integrating sphere Φ40mm,Alvan diffused reflection surface coating
Illumination Light source CLEDs(entire wavelength balanced LED light source)
Sensor dual light path sensor array
Wavelength range 400-700nm
Wavelength interval 10nm
Half spectral width 5nm
Reflectivity range 0-200%
Reflectivity resolution 0.01%
Observation angle 2°/10°
Measurement light source A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,
F11,F12,DLF,TL83,TL84,NBF,U30,CWF
Data being displayed SPD distribution/data, sample’s color values, color difference
values/graph, pass/fail results, color error tendency, color simulation,
display measurement area,history data color simulation,manual input standard sample,generate measurement report
Measurement time About 1 second
Measurement time interval 0.5 second
Measuring caliber Φ11mm
Color space CIE-L*a*b,L*C*h,L*u*v,XYZ,Yxy,reflectivity,Hunterlab,Munsell MI,CMYK
Color difference formulas ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00,ΔEab(Hunter),
555,color classification
Other colorimetric indices WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC,Hunter,Taube Berger Stensby),
YI(ASTM D1925,ASTM E313-00,ASTM E313-73),Tint(ASTM E313,CIE,Ganz),metamerism index Milm, adhesive/changing
color fastness, ISO luminance,8 gloss, A density, T density
Repeatability light splitting reflectivity: standard deviation within 0.08%
color values:ΔE*ab<=0.015( After calibration, standard deviation of 30 measurements on test
white board,
5 second intervals),Maximum: 0.03
Battery capacity rechargeable, 20000 continuous tests, 7.4V/6000mAh
Interface USB
Data storage 40000 test results
Light source longevity 10 years, 3 million tests
Inter-instrumentag reement ΔE*ab within 0.2( BCRA color charts II, average of the 12 charts)
Size 350*300*200mm(L*W*H)
Weight About 4.5kg
Display 5-inch True color screen
Work temperature range 0~45℃, relative humidity 80% or below(at 35°C), no condensation
Storage temperature range -25℃ to 55℃, relative humidity 80% or below( at 35°C), no condensation
Standard accessories AC power line, manual, color management software, drive software, electronic
manual, color management guide, USB cable, black/white calibration tube,
electronic color charts
Optional accessories powder molding device,  measurement and test report
Color matching system Matches
UV light source Does not include UV light source
SKU: cs-800 Categories: , Tag:

Catalog

Download Catalog