BI-650

Industrial Conductivity Controller

SKU: bi-650 Category: Tag:

Description

MEASUREMENT PARAMETERS

Conductivity and Total Dissolved Solids.

FEATURES

  • Economical online conductivity controller contains the TDS measurement mode.
  • 1 to 3 points push-button calibration, automatically recognizes the calibration solutions.
  • Selectable cell constant (0.1/1/10), temperature coefficient and TDS conversion factor.
  • Automatic Temperature Compensation provides accurate reading over the entire range.
  • Low or high alarm limit can be set by user and automatically activate an external device.
  • 4 to 20mA output signal meets industry standard.
  • Manual temperature calibration corrects the temperature deviation.
  • Setup menus allows setting the 9 parameters, including the number of calibration points, temperature unit, alarm limits, hysteresis value, etc.
  • Reset feature automatically resumes all settings back to factory default options.

METER INCLUDES

IE-50MT industrial conductivity electrode

 

ModelBI-650
pHMeasuring Range0.01~20.00, 200.0, 2000µS/cm, 20.00, 200mS/cm
Accuracy±1% F.S
Resolution0.01, 0.1, 1
Calibration Points1~3 points (84µS/cm, 1413µS/cm, 12.88mS/cm, 111.8mS/cm)
TDSMeasuring Range0~10.00, 100.0, 1000ppm, 10.00, 100ppt (Max. 200ppt)
Accuracy±1% F.S
Resolution0.01, 0.1, 1
TDS Factor0.01~1.00 (Default 0.5)
GeneralTemperature Compensation0~100 C, 32~212 F, Automatic
Temperature CoefficientLinear, 0.0~10.0%/°C
Cell ConstantK=0.1, 1, 10
Reference Temperature25°C
Signal Output4~20mA
LoadMax. 500Ω
Low and High Alarm Limits0.02µS/cm~20.0mS/cm, Selectable
Communication InterfaceRS485
Connection TerminalsDetachable screw terminals
Power RequirementsDC24V
Dimensions96(L)×96(W)×75(H)mm
Weight350g

 

Download Brochure

Catalog

Download Brochure

Search