WJ-2/WJ-2-160 CO2 Incubator
Features:
★Water jacket and air jacket structure are available, polished stainless-steel chamber with air duct.
★Equipped with fan for forced convection, ensuring good temperature uniformity and the balance of CO2 concentration inside.
★PID microprocessor is used to control temperature,meanwhile,the temperature of chamber ,water and door are separately controlled by three probes to ensure high accuracy. ( Air jacket is equipped with two probes to control door temperature and main body temperature.)
★Digital display for setting parameters,each working state has LED indication.
★ Alarm function for over-heating, lack of water, unaspirated, ensuring the safe operation of the equipment.
★Equipped with UV sterilization system to reduce pollution.
★ Natural evaporation for humidification to ensure the chamber can maintain good humidity .
★ The ratio of CO2 gas and air can be arbitrarily selected according to the needs, direct reading type flow meter, accurate and easy operation.
Spec:
| Model | WJ-2 | WJ-2-160 |
| Chamber Volume（L） | 80 | 160 |
| Temperature Range（℃） | RT+3～60 | |
| Temperature Stability（℃） | ≤±0.2 | |
| Temperature Uniformity（℃） | ≤±0.3 | |
| Timing Range | 1～9999min or without timing | |
| CO2 Range | 0～20% | |
| Humidity Method | Natural Vaporization | |
| Power Supply | AC220V,50HZ | |
| Power Rating（W） | 600 | 900 |
| Chamber Size (W×D×H)cm | 40×40×50 | 50×50×65 |
| Exterior Size（(W×D×H)cm | 57×59×93 | 69×69×103 |
| Shelf(Std/Max) | 2/9 | 3/13 |