Walk-in Fume Hood

Fume Hood is used to protect lab environment and operator during general chemical applications .It actively protects operator from inhaling toxic vapors and dramatically reduces the risk of fire and explosion. By installing proper filter, it can also protect environment.


1.With memory function in case of power-failure.

2. Operators are available to walk into the fume hood to operate if need.

3. Large room exhaust system, suitable for large laboratory instruments and equipment.

Technical Parameters

Model FH1200(W) FH1500(W) FH1800(W)
External Size (W*D*H) 1200*800*2200mm 1500*800*2200mm 1800*800*2200mm
Internal Size (W*D*H) 980*600*1650mm 1280*600*1650mm 1580*600*1650mm
Max Opening 1300mm
Exhaust Airflow Volume 1150m3/h 1500m3/h 1850m3/h
Inflow Air Velocity 0.3~0.8m/s
Noise 62dB
Vibration XYZ direct ≤4μm
Illumination ≥800Lux
Fluorescent Lamp 12W*2 16W*2 16W*2
Power Supply AC220V±10%, 50/60Hz;110 V±10%, 60Hz
Consumption 400W 600W 800W
Front Window Manual, Toughened glass


Exterior 1.0mm cold-rolled steel with bacteria powder coating.
Interior High grade melamine board with good acid and alkali resistance function

Standard Accessory


Blower( External) ,LED lamp, Water tap, Gas tap, PP cup sink, Remote control water valve, Remote control gas valve, Waterproof sockets * 4,4 meters PVC exhaust duct
Sockets Total load of 4 waterproof sockets: ≤500W
Package Size(W*D*H)



Main body 1410*1050*2430/240kg 1710*1050*2430/280kg 2010*1050*2430/330kg
Exhaust Blower  1040*890*710/60kg 1040*890*710/60kg 1040*890*710/60kg



Categories: , Tag: