ECscan 30 Pocket Conductivity Meter

ECscan30 Pocket Conductivity/TDS Tester

Multiparameter pocket conductivity/TDS meter, 1 to 3 points calibration, Automatic Temperature Compensation, setup menu contains 6 options, accuracy: 1% F.S.

• Multiparameter pocket conductivity/TDS meter is equipped with a dual display LCD.
• Platinum conductivity cell provides the quick and reliable measurement results.
• 1 to 3 points calibration with automatic recognition for conductivity standards.
• Automatic temperature compensation corrects conductivity measurement to reference

   Model ECscan30
   Range 0 to 20.00, 200.0, 2000µS/cm, 20.00mS/cm
   Resolution 0.01, 0.1, 1
   Accuracy ±1% F.S.
   Calibration Points 1 to 3 points
   Calibration Solutions 84µS, 1413µS, 12.88mS
   Range 0 to 10.00, 100.0, 1000ppm, 10.00, 20.00ppt
   Resolution 0.01, 0.1, 1
   Accuracy ±1% F.S.
   TDS Factor 0.1 to 1.0 (default 0.5)
   Range 0 to 60°C/32 to 140°F
   Resolution 0.1°C/0.1°F
   Accuracy ±1°C/±1.8°F
   Offset Calibration 1 point
   Calibration Range Reading ±10°C
   General Specifications
   Temperature Compensation 0 to 60°C/32 to 140°F, automatic
   Temperature Coefficient 2%/°C, linear
   Reference Temperature 25°C
   Cell Constant K=1
   Hold Function Manual or auto-endpoint
   Auto-Power Off 8 minutes after last key pressed
   Sensor Type ECSCAN-C1-10K
   Display Dual-line LCD (21×21mm)
   Power 2×1.5V AAA batteries
   Battery Life Approximately 200 hours of continuous use
   Dimensions 185(L)×40(Dia.)mm
   Weight 100g



Download Catalog


Download Manual