SYD-260A Water Content Tester
Summary
This instrument is made and designed as per GB/T260 Standard Test Method for Water in Petroleum Products and ASTM D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. This instrument is suitable to determine the water content of petroleum products according to the test method specified in GB/T260. It is also suitable to determine the water content of lubricating grease according to the test method specified in GB/T 512 Test Method for Water Content of Lubricating Grease. This instrument adopts double-unit structure. It can do determination for two samples.
Main technical features
- The gripper is designed reasonably. The installation and dismantlement are convenient.
- The heating power is continuously adjustable. The voltmeter displays the power intuitionally. The temperature control is reasonable.
- It can do parallel test for two samples.The working efficiency is high.
Main technical specifications
-
- Power supply： AC(220±10%)V，50Hz
- Total power consumption: ≤2200W
- Heating control： Can be continuously adjusted by a silicon knob, manual.
- Suitable environment: Ambient temperature:（15-35）℃, Relative humidity: ≤85%
- Dimension： 430mm×320mm×700mm
- Net weight：5kg.
Full set and technical documents
| No. | Name | Unit | Quantity | Remark |
| 1 | Main unit | Set | 1 | |
| 2 | Standing rod | Piece | 2 | |
| 3 | Clamps for condensation tube | Pair | 2 | |
| 4 | Condensation tube | Piece | 2 | |
| 5 | Receiving tube | Piece | 2 | |
| 6 | Round bottom flask | Piece | 2 | |
| 7 | Rubber tube(Φ22*3)-0.2meter | Piece | 1 | |
| 8 | Silica gel tube(Φ12*2)-6meters | Piece | 1 | |
| 9 | Inlet joint | Piece | 1 | |
| 10 | Three-way assembly | Piece | 1 |
