Anaerobic Workstation LAI-D2
Features:
1. This workstation integrates CO2, temperature humidity in anaerobic incubator as whole.
2.Can operate as an anaerobic or micro-oxygen chamber (oxygen concentration: 0-10%).
3. Fully automatic humidity control system to avoid drying of the Petri dishes.
4. Sample transfer: can transfer 40 pcs of 90mm plates at a time, single dish transfer device is optional.
5. Using high-efficiency palladium catalyst to keep the oxygen concentration less than 0.1% without frequent activation.
6.UV lamp for sterilization.
7. Full-automatic control for gas replacement path, with positive pressure and negative pressure protection.
8. Unique oil bottle type pressure relief design, protects internal positive pressure and prevents air leakage.
9.With a number of low pressure, over temperature protection devices.
10.The whole front cover can be lifted off for placing large instruments or thorough cleaning.
12. Equipped with standard power socket inside the chamber.
13. Touch screen directly displays the oxygen percentage of the operating room, easy for observation.
14. Latex gloves for comfortable and flexible operation.
15. Bare-hand operating system is optional. Ensure comfortable operation with no skin allergies.
Spec:
Model | LAI-D2 |
Time for creating anaerobic state in sample chamber | <5 minutes |
Time for creating anaerobic state in operation chamber | <1hr |
Anaerobic environment maintenance time | >13hrs(when no supply of mixed gas) |
Temperature Range
|
RT+3~60℃ |
Temperature Stability | <±0.3℃ |
Temperature Uniformity | <±1℃ |
CO2 Range | 0~20% |
CO2 Control Accuracy | ±0.1%(imported sensor) |
Humidity Control Range | 50~90%RH |
Humidity Fluctuation | ±3%RH |
Power Rating | 1500W |
Power Supply | AC 220V,50HZ(can customized) |
Interior Chamber Size (W×D×H)cm | 42×29×47.5 |
Operation Chamber Size (W×D×H)cm | 95×67×75 |
Sampling chamber size (W×D×H)cm | 40×30×32 |
Shell material | All 304 stainless steel |