Refrigerated Shaking Water Bath
Application Overview
Widely used in laboratory research requiring precise shaking and temperature control, including bacterial culture, fermentation, hybridization, chemical and biochemical reactions, and enzyme and tissue research.
Product Features
- The stainless-steel inner vessel and lid resist corrosion and are easy to clean;
- A microcomputer PID temperature controller provides precise, reliable control with a timer;
- Audible and visual overtemperature tracking alarms reliably protect samples and prevent accidents;
- A stepless-speed AC geared motor directly drives the shaking platform with high linearity and low noise;
- The shaking rack is easily removable for convenient cleaning;
- Self-diagnostics (open-circuit heater, sensor fault, upper- and lower-temperature-limit alarms)
Multi-segment Programmable Controller (Optional)
- A microcomputer programmable controller controls time and heating rate for very rapid constant-temperature tests;
- 7 groups totaling 63 programmable steps can be preset, with a time setting of 1~99 hours 59 minutes for each group;
- Multi-segment programmable control simplifies complex experimental procedures and enables automatic control and operation;
- Shaking starts slowly to prevent water from spilling out of the bath;
Technical Specifications
| Technical Specification / Model | DKZ-1 DKZ-2 |
DKZ-2B | DKZ-3 DKZ-3B |
DKZ-1C DKZ-2C |
|---|---|---|---|---|
| Temperature Range | RT+5~99°C | 10~99°C | ||
| Temperature Resolution | 0.1°C | |||
| Temperature Uniformity | ±1°C | |||
| Shaking Frequency | 30~180 rpm | |||
| Amplitude | 30mm or 40mm selectable (specify in the order) | |||
| Supply Voltage | AC220V 50HZ | |||
| Input Power | 1250W | 1650W | 1500W | |
| Chamber Dimensions (mm) W×D×H | 438×310×250 | 618×310×250 | 440×300×250 | |
| Overall Dimensions (mm) W×D×H | 643×350×353 | 823×350×355 | 710×410×710 | |
Note: The inner vessel and housing of DKZ-2B and DKZ-3B are entirely stainless steel.
※ Performance parameters are tested without a load at an ambient temperature of 20°C and ambient humidity of 50%RH.
Optional Accessories:
1. Multi-segment programmable LCD temperature controller
2. RS485 interface and communication software
3. Built-in printer
Note: choose either RS485/232 or printer.
