* 3 digits LED dispalys the motor speed.
* Big torque, low consumption, strong adaptability.
* Full spedd button: with full filling and emptying function.
* Circuit board spray with three anti-paint.Anti-dust, anti-moisture, anti-static, resist corrosion.
* Timing test function, time range: 0.5-999s, setting test time freely, can be used for simple dispensing.
* Super strong anti-jamming feature, wide voltage design, suitable for complex power supply environment.
* Good performance drive circuit, good cooling condition, low noise, working stable, power down memory function.
* Membrane keyboard control, not only adjust speed manually, but also control automatically through external interface.
* Internal isolate external control design. External control signal have active signal and passive signal, users can use it freely.
* Optional RS232 and RS485 communication. It is controlled by PC through RS232 and serial debugging sofrware, control the pump start/stop, direction and speed, to achieve dispensing and filling function. It also can feed back pump working status according to external control request.
Technical Parameters:
Model | BPP-LabM1 | BPP-LabM3 | BPP-LabM6 | |||||
Drive | LabM1 | LabM3 | LabM6 | |||||
Speed range | 0.5-150rpm | 0.5-350rpm | 0.5-600rpm | |||||
Pump Head | YZ1515x | YZ2515x | MC1-MC12(10) | MC1-MC12(6) | YZ
1515x |
YZ
2515x |
YZ
1515x |
YZ
2515x |
Tubing Size | 13#,
14#,19#, 16#,25#, 17#,18# |
15#, 24# | ID:0.13-3.17mm, | 13#,
14#,19#, 16#,25#, 17#, 18# |
15#,
24# |
13#,
14#,19#, 16#,25#, 17#, 18# |
15#,
24# |
|
Wall thickness: 0.86-1.0mm | ||||||||
Flow Rate
( mL/min) |
0.035~570 | 0.85~435 | 0.00034-32
(suggest working rotating speed less than 150rpm) |
0.0004-45
(suggest working rotating speed less than 150rpm) |
0.035
~1330 |
0.85
~1035 |
0.035
~2280 |
0.17
~1740 |
Flow rate range | 0.00034-570ml/min | 0.035-1330ml/min | 0.035-2280ml/min | |||||
Speed precision | 0.1 rpm | |||||||
Flow rate
precision |
<±0.5% | |||||||
Motor type | Stepper motor | |||||||
Circuit System | N-CIR | |||||||
Display | LED screen | |||||||
Control method | N-EMB | |||||||
External control | 0-5V(standard), 0-10V, 4-20mA(optional) | |||||||
Start/Stop
direction Singal |
Passive switch signal, such as : foot pedal switch | |||||||
Active switch signal: 5V, 12V and 24V for option | ||||||||
Power supply | 220V±10%, 50Hz/60Hz ( standard), | |||||||
110V±10%, 50Hz/60Hz (optional) | ||||||||
Drive external size | 216.4*157.3*230.7mm | |||||||
Drive weight | 5.02kg | |||||||
Consumption | <50W | |||||||
Working
condition |
Environment temperature: 0-40℃ | |||||||
Relative humidity: <80% | ||||||||
IP rate | IP31 |