FC-50-L Series CO2 Incubator (Dry Heat Sterilization at 140°C)
Characteristics
Equipped with a 7.0-inch full-color touch screen.
Standardly fitted with imported high-precision infrared CO₂ concentration sensor.
Supports three-level authority management and features 140°C high-temperature sterilization function.
Adopts six-sided air-jacket heating system with optimized air duct structure, delivering excellent temperature uniformity and fast heating & temperature recovery.
● Designed with bottom water tank for large evaporation area and rapid humidity recovery. Equipped with door heating device to prevent condensation on inner glass door. Fitted with high-efficiency filter and intake air filter to guarantee air cleanliness inside the chamber.
Technical Specifications
| Model | FC-50-L | FC-80-L | FC-150-L | FC-180-L | |
|---|---|---|---|---|---|
| Heating System | Microcomputer-controlled air jacket heating | ||||
| Performance | Operating Temperature Range | RT+5-65°C | |||
| Temperature Resolution | 0.1°C | ||||
| Temperature Fluctuation | +0.1°C | ||||
| Temperature Uniformity | +0.3°C | ||||
| CO _2 Sensor | Infrared type; Measuring range: 0.0-21.0% | ||||
| CO _2 Control Range | 0.0-20.0% | ||||
| CO _2 Control Accuracy | +0.1% | ||||
| Construction | Inner Chamber | SUS 304 stainless steel | |||
| Outer Cabinet | Cold-rolled steel plate with electrostatic spray coating | ||||
| Insulation Layer | Polyurethane | ||||
| Heater | Heating sheet | ||||
| Humidification Method | Humidification tray | ||||
| Rated Power | 0.4kW | 0.5kW | 0.6kW | 0.7kW | |
| Exhaust Port | φ 27mm at rear (with test port function) | ||||
| Other | High-efficiency filter | ||||
| Controller | Control Mode | Intelligent fuzzy PID control | |||
| Setting Method | Touch screen | ||||
| Representation method | Temperature shown on left of LCD, CO _2 concentration on right | ||||
| Timer | 0-9999 minutes (with delay timing function) | ||||
| Operation Mode | Constant temperature run, timed run, auto stop | ||||
| Sterilization Function | High-temperature sterilization | ||||
| Additional Functions | Sensor deviation correction, temperature overshoot auto-tuning, internal parameter lock, power-off parameter memory | ||||
| Sensor | PT100 temperature sensor, water level sensor, CO _2 sensor | ||||
| Safety Device | High temperature alarm, CO _2 concentration alarm, multi-functional fault alarm | ||||
| Specification | Inner Chamber(W*L*Hmm) | 345 × 375 × 388 | 404 × 439 × 454 | 509 × 472 × 632 | 540 × 500 × 670 |
| Exterior Size(W*L*H mm) | 500 × 500 × 655 | 585 × 585 × 766 | 593 × 746 × 842 | 629 × 791 × 893 | |
| Packing Size(W*L*H mm) | 620 × 620 × 855 | 705 × 705 × 966 | 713 × 866 × 1042 | 749 × 911 × 1093 | |
| Internal Volume | 50L | 80L | 150L | 180L | |
| Max. Shelf Layers | 4 | 5 | 6 | 7 | |
| Shelf Load Capacity | 15kg | ||||
| Shelf Spacing | 35mm | ||||
| Power Supply (50/60 Hz) Rated Current | AC220V/1.8A | AC220V/2.3A | AC220V/2.7A | AC220V/3.2A | |
| N.W/G.W(kg) | 55/70 | 70/85 | 93/108 | 115/130 | |
| Accessory | Shelves | 2 | |||
| Shelf Supports | 4 | ||||
| Optional Accessories | Shelf, printer | ||||
