Specifications
- Force measurement: 5 ~ 10N Power consumption: <20μA
- Operating temperature: 0 ~ 40 ℃ Storage temperature: -20 ~ 60 ℃
- 7 matters needing attention
- Do not rinse or impact the micrometer
- Do not disassemble the micrometer without permission
- Do not press buttons with sharp objects
- Do not expose the micrometer and do not place the micrometer in an overheated or cold environment
- Do not place the micrometer in a strong magnetic and high voltage environment
- Use a soft cloth dipped in a small amount of alcohol to clean the micrometer. Do not use organic solvents such as acetone or benzene to clean the micrometer.
- Please clean the measuring surface before using the micrometer
Troubleshooting:
| The measured value is incorrect | 1. The measuring surface is not clean
2. The initial value is incorrect |
1. Clean the measuring surface
2. Reset the initial value |
| LCD does not display
LCD display is fuzzy or missing strokes |
1. The battery voltage is lower than 2.7V
2. Incorrect battery installation |
1. Replace the battery
2. Reinstall the battery |
| 1. The display is blurred
2. The displayed value is incorrect |
Battery voltage is lower than 2.7V | Replacement battery
Replacement battery |