Forced Air Drying Oven
Used for drying, baking, wax, heat treatment.
Characteristics:
- Horizontal air circularly by double air ducts, high efficiency and high uniformity.
- PID controller, with over-temperature protection function.
- With fan switch, LED digital display, high temperature blast motor.
- New anti-hot handle
WGLL-BE series have the following characteristics other than the above functions.
- LCD temperature controller, SSR to make sure the safety
- 4 grades speed fan, adjustable for different requirements.
- Over-temperature protection system.
- Independent temperature limiter.
Main Technical Parameters:
|
Model
|
WGL-30B | WGL-45B | WGL-65B | WGL-85B | WGL-125B | WGL-230B | WGL-625B | |
| WGLL-30BE | WGLL-45BE | WGLL-65BE | WGLL-85BE | WGLL-125BE | WGLL-230BE | WGLL-625BE | ||
| Cycle Mode | Forced convection | |||||||
|
Function
|
Temp. Range | RT+10-300°C | ||||||
| Temp. Resolution Ratio | 0.1°C | |||||||
| Temp. Motion | ±1°C | |||||||
| Temp. Uniformity | ±2.5% | |||||||
|
Structure
|
Inner Chamber | Mirror Stainless Steel | ||||||
| Outer Shell | Cold rolling steel electrostatic spraying exterior | |||||||
| Insulation layer | High Quality rock wool board(with CE) | |||||||
| Heater | Stainless steel heater | |||||||
| Power rating | 0.8kW | 1.2kW | 1.6kW | 2.0kW | 2.3kW | 3.0kW | 5.0kW | |
| Exhaust hole | Φ 28mmtop(with function of test hole) | Rear exhaust | Top double exhaust |
|||||
|
Controller
|
Temp. control mode | Two temperature section PID intelligent | ||||||
| Temp. setting mode | Touch button setting | |||||||
|
Temp. display mode
|
B model: Measuring temperature: display on the four digital tubes upper row, setting temperature:display on the lower row | |||||||
| BE model: Measuring temperature display on upper LCD screen, setting temperature: display on the lower row | ||||||||
| Timer | 0-9999min(with timing wait function) | |||||||
| Operation function | Fixed temperature operation, timing function, auto stop. | |||||||
|
Additional function
|
B model: Sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power-off parameter memory |
|||||||
| BE model: Mechanical independent temperature limiter, 4 grades 3 speed adjustable-speed fan (230 and 625 model BE without fan speed adjustor). sensor deviation correction, temperature overshoot self tuning, internal parameter locking, power-off parameter memory. |
||||||||
| Sensor | pt100 | |||||||
|
Specification
|
Inner Chamber size(W*L*H)(mm) |
310*310*310 | 350*350*350 | 400*360*450 | 450*420*450 | 500*450*550 | 600*500*750 | 660*760*1250 |
| Exterior size (W*L*H)(mm) |
450*500*690 | 490*540*730 | 540*550*830 | 590*610*830 | 640*640*930 | 730*680*1250 | 890*925*1830 | |
| Packing size (W*L*H)(mm) |
550*585*845 | 590*625*885 | 640*635*985 | 690*695*985 | 740*725*1085 | 860*790*1400 | 1000*1080*2000 | |
| Volume | 30L | 45L | 65L | 85L | 125L | 230L | 625L | |
| Shell number | 6 | 7 | 9 | 9 | 13 | 17 | 17 | |
| Load per rack | 15kg | |||||||
| Shell space | 35mm | 150mm | ||||||
| Power rating (50/60HZ) | AC220V/3.6A | AC220V/5.5A | AC220V/7.2A | AC220V/9.0A | AC220V/10.5A | AC220V/13.6A | AC380V/7.6A | |
| NW/GW(kg) | 33/37 | 37/43 | 44/49 | 50/56 | 60/65 | 94/120 | 120/160 | |
|
Accessory
|
Shell | 2 | ||||||
| Shell frame | 4 | |||||||
| Optional accessories | B model: Shelf; BE model: Shelf RS485 interface, printer, program temperature control device, remote control, wireless SMS alarm, USB data storage |
|||||||