|
|
Mould Incubator ------Microprocessor Control (with Timing Function) | | | MJ-150(I, II) MJ-250(I, II) | MJ-70-I MJ-70F-I |
| Summary: | | Serve for environmental protection hygiene and anti-epidemic, pharmaceutical test, workstock and aquatic products etc, which applied in scientific research institute, college and manufacture department, It is a dedicated constant-temperature equipment for analysis of water body ,BOD test, cultivation and storage of bacteria, moulds and microorganisms, plant cultivation and seed-breeding test. | | | Features: 1. | Specular stainless-steel chamber, semicircular arcs at corners for easy cleaning, and the space between the shelves in the chamber is adjustable. | 2. | Microprocessor temperature controller ensures a precise and reliable control. | | 3. | With circulating fan speed auto-control system, avoid the volatilization of sample when the fan speed is too fast. | 4. | Independent alarm system for temperature-limiting ensures experiments run safely and no accident would happen.(Option) | | 5. | RS485 interface and printer interface may link computer& printer, can remote monitor the condition of machine.( Option) | | 6. | International brand compressor and circulating fan, environmental protection cryogen(R134a), with high efficiency and low power consumption, promoting energy.( The model with "F" have this function) | | | | | | Option accessories: | | | 1. Intelligent programable temperature controller (For mould with "I") | | | Intelligent programable humidity controller. (For mould with "II") | | | 2. Printer | | | 3. Independent temperature-limiting controller. | | | 4. Test hole on the left(diameter-25mm) | | | 5. BOD socket | | | 6. RS485 connector and communication software. |
Specifications: Model | Mould Incubator | MJ-70-I
MJ-70F-I | MJ-150-I
MJ-150F-I | MJ-150-II | MJ-250-I
MJ-250F-I | MJ-250-II | Temperature Range | 0~60oC | With humidity:
15~45oC
Without humidity:
10~45oC | 0~60oC | With humidity:
15~45oC
Without humidity:10~45oC | Temperature Control | 0.1oC | Temperature Stability | High Temperature:±0.5oC/Low Temperature:±1.0oC | Humidity Range | | 60~85%RH | | 60~85%RH | Humidity Stability | | ±5%~±8%RH | | ±5%~±8%RH | Electrical Requirements | 220V 50Hz | Ambient Temperature | +5~30oC | Input Power | 350W | 450W | 680W | 650W/
850W | 650W | Interior Dimension
(mm)W*D*H | 400*350*500 | 500*370*800
/600*600*835 | 520*460*1050 | 600*600*835 | Overall Dimension
(mm)W*D*H | 530*560*1080 | 600*575*1325
/740*705*1510 | 620*690*1590 | 740*705*1510 | Shelves per chamber (Normal) | 2(pcs) | 3(pcs) | Timing Range | 1-9999 min | Note | Model 11 has a microprocessor controller for humidity control. |
* Specification test under no load condition: ambient temperature is 20℃ ,and relative humidity is 50%. |
|
: |
|
|
%20&%20Lab%20incubator/MouldIncubator/image002.jpg)
%20&%20Lab%20incubator/MouldIncubator/image003.jpg)
