Product Information
The Dry Bath Incubator is a microprocessor-controlled product using advanced thermoelectric technique. With this technique, more stable and accurate temperature control is achieved. Replacement is convenient with optional metal modules of various specifications configured for different types of test tubes.
Features
1. LCD display. It is easy to set up and use
2. Simultaneous display of set and actual time, temperature
3. Temperature deflection adjusting meet with different demands
4. Easy to replace the metal blocks and is very simple to clean and sterilize
5. Microprocessor controlled incubation time and temperature
6. Beep-signal/Stop after program completed
7. Peltier design of MK-20 provides efficient thermal control
Technical Data
Model | MK-10 | MK-20 |
Temperature Control Range | RT.+5°C~100°C | -10°C~100°C |
Timing Range | 1min~99h59min | 1min~99h59min |
Temp. Control Accuracy | ±0.5°C | ±0.5°C |
Display Accuracy | ±0.1°C | ±0.1°C |
Heating Time(25 to 100°C) | ≤12min | ≤15min |
Cooling Time(20 to -10°C) | —- | ≤15min (*) |
Heating Part | Heater | Peltier |
Cooling Part | —- | Peltier |
Certificate | CE | CE |
Dimension(mm) | 300 x 220x 180 | 300 x 220x 180 |
Net Weight | 2.5kg | 5kg |
*1) Cooling time ≤15min (20°C to -5°C) if the room temperature is lower than 30 °C
*2) Cooling time ≤15min (20°C to -10°C) if the room temperature is lower than 25 °C
Accessories
Blocks for Dry Bath Incubator MK-10
Type |
Parameter |
Max. Temp |
Min. Temp |
A |
96×0.2ml PCR plate |
100℃ |
-10℃ |
B |
54×0.5ml |
100℃ |
-10℃ |
C |
35×1.5ml |
100℃ |
-10℃ |
D |
35×2.0ml |
100℃ |
-10℃ |
E |
15×0.5ml+20×1.5ml |
100℃ |
-10℃ |
F |
24×Dia.≤φ12mm tube |
100℃ |
0℃ |
G |
12×15ml Falcon tube |
100℃ |
0℃ |
H |
6×50ml Falcon tube |
100℃ |
0℃ |
I |
103×67×30 Water bath block |
100℃ |
0℃ |
J |
96×0.2ml plate |
100℃ |
-10℃ |
K |
24×5.0ml |
100℃ |
0℃ |
L |
96-Deep well plate |
80℃ |
8℃ |