Resistance Furnace (Muffle Furnace) |
|
| Scope of application: |
| The products are widely applied in the chemical analysis and physical determination for labs in industrial and mining enterprises, scientific research institutes, etc; sintering stoneware, porcelain and ceramics; high-temperature heat treatment for metal annealing, quenching and tempering. |
| |
| |
| Features: |
| 1.Special door design, easy to operate to avoid the leakage of high temperature. |
| 2.Micropocessore & PID controller, Accurate Controlled Temperature, safe and reliable |
| 3. Anti-corrosion chamber with long life (Firebricks Chamber or Ceramic fiber Chamber) |
| 4. Good door seal to minimum the loss of heat, increase the uniformity of temperature in chamber. |
| 5. Programmable Controller,30priods, max timing setting for each period is 99 hours 59 minutes. ("P"series have it) |
| 6. Can set several program to control the complicated test procedure, realize autorun. |
| 7. Inner side of the door and chamber surface made of stainless-steel ("P"series have it) |
| |
| |
| Safety: |
| 1. Heat power will shut down when the door open. |
| 2. Have security of over-temperature, over-current and over pressure to avoid the incident. |
| 3 Use ceramic fiber as thermal Insulation Materials, the temperature on surface is low. |
| |
| |
| Resistance of furnaces |
| * N-series hearth: It adopts traditional refractory material and features wide application, high performance-price ratio, long service life, etc. |
* T-series hearth (ceramic fiber):
It adopts high-density ceramic fiber, an emerging modern refractory material, featuring light weight, rapid temperature rise, time saving, etc, to
satisfy the requirements on rapid sintering under various conditions. It is the optimal substitute for traditional hearth. |
| |
| Spec: |
